Compact Decorative
These low profile light sources use a metal halide discharge lamp to give much greater brightness than the halogen range.
They do require more ventilation but produce a more intense light than low voltage units.
This model has a fast re-lamping feature and comes fitted with either a colour, twinkle or dimmer wheel.
Please note: All fibre optic light sources require free ventilation.
Information
Colour Temperature: 4200k (CDM-SA/T), 3000k (Others)
Lamp CRI: 96 (CDM-SA/T)
Lamp Base: G12
Gear: Electronic/magnetic
Lamp Life: c. 6000 hours (150w)
Operating Voltage: 230v AC or 115v AC (factory option)
Warm Up Time: 1 minute
Fan Type: Crossflow
Common End Size: 30mm diameter
Enclosure: Black, sheet steel
Dimensions (mm): 288(L) x 277(W) x 129(H)
Weight: 3.5kg
Certfication: CE, ETL, PCT
RPM / Colour Duration calculator
The table below shows how long the light of each colour will be seen, depending on the number of segments in the colour wheel and the speed of the motor specified.
| RPM | 2 Segment Colour Wheel | 3 Segment Colour Wheel | 4 Segment Colour Wheel | 6 Segment Colour Wheel |
|---|---|---|---|---|
| 0.5 | 60 seconds | 40 seconds | 30 seconds | 20 seconds |
| 1.0 | 30 seconds | 20 seconds | 15 seconds | 10 seconds |
| 2.5 | 12 seconds | 8 seconds | 6 seconds | 4 seconds |
| 3.0 | 10 seconds | 7 seconds | 5 seconds | 3.5 seconds |
Wheel Colours
| Dichroic Wheel Colours |
|---|
|
The standard dichroic colour wheel supplied with this light source comes with six colours. These are: Clear Blue Purple Orange Green Yellow |
Other colour options
We can provide light sources configured with our unique Varicolour colour wheels.
Alternatively, we can ‘sandwich’ a colour wheel and a modified twinkle wheel together giving the light output the properties of both in a single wheel.
Wheel Control Options explained
Continuous - the colourwheel can not be stopped.
Switch - A switch is fitted on the light source allowing the motor to be switched on or off.
Separate Feed - A separate mains power feed is fitted allowing the motor to be wired through a light switch for remote operation.
Different x2 - Both wheels can be controlled independently.
Ordering options
This lightsource is available in a number of configurations. To specify your exact requirement, please use the lightsource configuration tool below to select the options you require. The proper part number will then be produced below when you click on the ‘update’ button. This page can then be printed for reference.
Current configuration Part number
CM G - 150 - E - S42 - C - C - E - D6 - 05 - X
Product Data Sheet
Download Product data sheet in PDF format
User Manual
Download User Manual in PDF format
