Information
Standard product information is shown in the table on the right.
Larger diameters are available on request with soft silicone at the ends of the tails for use when articulated fittings are used in a tight space for the fibre bend radius.
Tell a Friend
Print this Page
End Lit Polymer Harnesses
| Strands | Active Diameter | Approximate Sheathed Diameter | Maximum No. of Tails per Light Source | Minimum Bend Radius | Termination Type |
|---|---|---|---|---|---|
| 1 | 0.75mm | unsheathed/2mm | 1100 | 10/15 mm | -/crimp |
| 1 | 1mm | unsheathed/2.2mm | 560 | 15/20 mm | -/crimp |
| 1 | 1.5mm | unsheathed/2.6mm | 250 | 25/40 mm | -/crimp |
| 1 | 2mm | unsheathed/3mm | 150 | 30/60 mm | -/crimp |
| 7 | 2.3mm | 4.5mm | 115 | 20mm | -/M8/M10 ferrule |
| 12 | 3.1mm | 4.5mm | 65 | 25mm | -/M8/M10 ferrule |
| 25 | 4.3mm | 6.3mm | 38 | 30mm | -/M8/M10 ferrule |
| 33 | 5mm | 7.1mm | 25 | 50mm | -/M8/M10 ferrule |
| 50 | 6mm | 8.7mm | 17 | 60mm | -/M8/M10 ferrule |
| 67 | 7mm | 10.5mm | 12 | 80mm | -/M10 ferrule |
| 75 | 7.5mm | 10.5mm | 11 | 90mm | -/M10 ferrule |
| 88 | 8mm | 10.5mm | 10 | 100mm | -/M10 ferrule |
