Information
The main advantages of fibre optic lighting are its easy to achieve colour change properties and the ability to position the light source in an easily accessible place, no matter where the actual light points are to be located.
Our range of enclosures allows even greater flexibility when positioning a light source. These are not submersible and are not suitable for direct burial, but they are weatherproof, so allow a light source to be located outdoors.
Tell a Friend
Print this Page
UFO Weatherproof Enclosures
Weatherproof enclosures are made from 1.38mm thick single sheet steel and powder coated in RAL 7032 textured.
Dimensions, please note: the dimensions shown on the drawings are provided for guidance only. Please enquire about your specific application.
The enclosures are vented and require a circulation of cool air.
 |
 |
 |
| AVR Controller enclosure: front | AVR Controller enclosure: side | Enclosure |
 |
 |
 |
| Aurora Halogen: front | Aurora Halogen: side | Front |
 |
 |
 |
| 150W Metal Halide: front | 150W Metal Halide: side | Close up |
 |
 |
 |
| 150W DMX/Ultima: front | 150W DMX/Ultima: side | Electrical gland |
Mounting Variations
Our enclosures come in 4 standard sizes as detailed above, but configuration depends on the mounting orientation - we fit vents to the enclosures to suit. Normally enclosures are supplied with the harness factory fitted into the box.
We have divided the enclosures into two types - those which only have vents on the shallow sides (Type 1) for metal halide light sources, and those which can also have vents on the lid (Type 2) for halogen light sources.
Please see the product datasheet for more information.
 |
 |
| Enclosure Type 1A | Enclosure Type 1B |
 |
 |
| Enclosure Type 1C | Enclosure Type 1D |
 |
 |
| Enclosure Type 1E | Enclosure Type 1F |
 |
 |
| Enclosure Type 2A | Enclosure Type 2B |
 |
 |
| Enclosure Type 2C | Enclosure Type 2D |
 |
 |
| Enclosure Type 2E | Example installed in pit |