Recomendar a un Amigo
Print this Page
Dichroic Wheel Colours
The standard dichroic colour wheel supplied with this light source comes with six colours. These are:
AVR Wheel Colours
Alternatively, for an additional cost the light source can be configured for AVR control. The AVR colour wheel has seven colours.These are:
Otras Options
We can provide light sources configured with our unique Varicolour colour wheels.
Twin Effect Metal Halide Lightsource
These versatile light sources use a metal halide discharge lamp to give much greater brightness than the halogen range.
They do require more ventilation but produce a more intense light than low voltage units.
This model comes fitted with a colour and twinkle or dimmer wheel in the same unit.
Please note: All fibre optic light sources require free ventilation.
Ordering Options
This lightsource is available in a number of configurations. To specify your exact requirement, please use the lightsource configuration tool below to select the options you require. The proper part number will then be produced below when you click on the 'update' button. This page can then be printed for reference.
Current Configuration Part Number:
TW G - 150 - E - S42 - D - C - E - D6 - 05 - X
Specification:
4200k (CDM-SA/T)
3000k (CDM)
96 (CDM-SA-T)
G12
Magnetic
c.6000 hours (150w)
230v or 115v AC (factory option)
1 minute
Crossflow
30mm diameter
Green, sheet steel
364(L) x 259(W) x 162(H)
5.3kg
Configure the Lightsource
Wheel Control Options Explained
Continuous - the colourwheel can not be stopped.
Switch - A switch is fitted on the light source allowing the motor to be switched on or off.
Separate Feed - A separate mains power feed is fitted allowing the motor to be wired through a light switch for remote operation.
AVR - the colourwheel is configured for use with an AVR controller which can be supplied at extra cost.
Different x2 - Both wheels can be controlled independently.
RPM / Colour Duration Calculator
The table below shows how long the light of each colour will be seen, depending on the number of segments in the colour wheel and the speed of the motor specified.
| RPM | 2 Segment Colour Wheel | 3 Segment Colour Wheel | 4 Segment Colour Wheel | 6 Segment Colour Wheel |
|---|---|---|---|---|
| 0.5 | 60 seconds | 40 seconds | 30 seconds | 20 seconds |
| 1.0 | 30 seconds | 20 seconds | 15 seconds | 10 seconds |
| 2.5 | 12 seconds | 8 seconds | 6 seconds | 4 seconds |
| 3.0 | 10 seconds | 7 seconds | 5 seconds | 3.5 seconds |