Información
A selection of some commonly used ferrule types.
Please note that some dimensions may differ depending on the fibre size used.
Also, if silicon boot ends are used then the widest diameter of the ferrule will be increased.
Recomendar a un Amigo
Print this Page
Standard Ferrules
Please note:
Ferules shown are the largest sizes. Smaller fibre sizes vary in proportion.
M10, M8 and 8mm smooth ferrules are available in brass (indoor use) or stainless steel (outdoor or damp area use).
M10 and M8 brass radio nuts and M10 stainless steel half nuts are available for securing ferrules through a plane where no fitting is used.
| M10 Ferrule | M10 Ferrule |
|---|---|
 |
 |
| M10 Ferrule | M8 Ferrule |
 |
 |
| 8mm Smooth Ferrule | Tube Ferrule |
 |
 |
| 3.0mm Crimp Ferrule for 1.0mm fibre | 3.4mm Crimp Ferrule for 1.5mm fibre |
 |
 |
| 5.0mm Crimp Ferrule for 2mm fibre | 3.0mm Non-Crimp Ferrule |
 |
 |
| 5mm Smooth Ferrule | |
 |