End Lit Polymer Harnesses
Standard product information is shown in the table below.
End lit polymer fibre comes in two configurations - single sheathed or unsheathed strands of 0.75mm, 1mm, 1.5mm or 2mm diameter fibre, or as multiple sheathed strands of 0.75mm fibre.
Single strands of fibre give starry points of light and normally require no termination, whilst multi-stranded varieties are normally terminated with a ferrule to allow the attachment of an end fitting.
Larger diameters are available on request with soft silicone at the ends of the tails for use when articulated fittings are used in a tight space for the fibre bend radius.
Downloads
Product Image
Product Information
| Strands | Active Diameter | Approx. Sheathed Diameter | Max. No. of Tails per Light Source | Min. Bend Radius | Termination Type |
| 1 | 0.75mm | unsheathed/2mm | 1100 | 10/15mm | -/crimp |
| 1 | 1mm | unsheathed/2.2mm | 560 | 15/20mm | -/crimp |
| 1 | 1.5mm | unsheathed/2.6mm | 250 | 25/40mm | -/crimp |
| 1 | 2mm | unsheathed/3mm | 150 | 30/60mm | -/crimp |
| 7 | 2.3mm | 4.5mm | 115 | 20mm | -/M8/M10 ferrule |
| 12 | 3.1mm | 4.5mm | 65 | 25mm | -/M8/M10 ferrule |
| 25 | 4.3mm | 6.3mm | 38 | 30mm | -/M8/M10 ferrule |
| 33 | 5mm | 7.1mm | 25 | 50mm | -/M8/M10 ferrule |
| 50 | 6mm | 8.7mm | 17 | 60mm | -/M8/M10 ferrule |
| 67 | 7mm | 10.5mm | 12 | 80mm | -/M10 ferrule |
| 75 | 7.5mm | 10.5mm | 11 | 90mm | -/M10 ferrule |
| 88 | 8mm | 10.5mm | 10 | 100mm | -/M10 ferrule |
