Information
The rod and clamp assembly allows fibres and lenses to be surface mounted to a shelf or to the sides or bottom of a cabinet.
Rods are made to the customers specified length and comas standard in black alothough they and the clamps can be custom painted to any standard RAL colour as required.
Tell-a-Friend
Diese Seite drucken
Rod and Clamp
The rods are typically mounted using a foot on the top or underside of the mounting surface.
A number of lenses can be supported by one rod, depending on the length of rod used. The fibre tails run separately to each lens.
Lenses normally used with the rod and clamp are the UFO25D and the UFO26D, however, being special assemblies made to order, the rod and clamp system can be adapted to the required application - as is shown by image no. 3 above.
CAD Image
